ArChine Microfluid A

-

Semi-Sythetic Watermix Metalworking Fluid
Description：
Archine Microfluid A is a EP semi-sythetic watermix metalworking fluid for machining of ferrous metals, for examples, cast irons、steel、low carbon steel、medium carbon steel、high carbon steel、alloy steels、stainless steels. And much suitable for general maching、cutting and grinding.
Application:
Archine Microfluid A emulsion features a long time stability even under hot and humid weather conditions, contaminated mixing water and adverse machine surroundings.
Properties:
· semi-transparent, finely dispersed emulsion
· very low foaming
· excellent flushing effect
· special long-term stability, good sump life
· reliable long-time corrosion protection
· good skin tolerance
· pleasant smell
Technical Data: -

Remarks：
To prepare operating emulsion slowly add the coolant concentrate to drinking quality water assuring thorough mixing. Mixing can also be done by means of an automatic mixer.
Recommended mixing ratios:
Machining of steel and non ferrous metals: from 4 %
Machining of cast iron and high tensile steel: from 5 %
Machining of aluminium alloys: from 5 %
The concentration of the operating emulsion can be determined by means of a pocket efractometer. The °Brix value multiplied by the refractometer value equals the concentration n %. Sometimes reading of scale is more difficult with older emulsions because of the more coarse dispersivity.
Refractometer factor：1.00
Archine coolants are free of chlorinated organic substances, nitrite and secondary amines.This product contains natural raw materials. Therefore, different shades of colour and ppearance are possible, however, quality and function of the product are not affected at all.
Subject to modification of the technical data. Please refer to the material safety data sheet for additional information or contact our application engineers.