Keramik-Paste (Ceramic Paste)

DESCRIPTION Ceramic Paste is a partially synthetic, metal-free universal paste which has been formulated for the most demanding applications. The combination of a partially synthetic base oil, a mature additive technology and the most state-of-the-art solid lubricants from the area of high-tech ceramics have produced a high-performance paste for universal use.-

PROPERTIES - prevents seizing and cold welding
- prevents stick-slip behaviour even for high surface pressures
- very stable in the presence of hot and cold water as well as most acids and alkalis
- does not attack any known sealing materials
- very high load-carrying capacity
- prevents brake noise
- non-toxic

TECHNICAL
DATA Colour : white
Basis : synthetic oil/mineral oil
Thickener : inorganic thickeners and light solid lubricants
Density at 20 °C : 1.42 g/cm3
Drop point : none
Operating temperature
range : approx. -40 °C to +1,400 °C Unworked penetration : approx. 340
Base oil viscosity 40 °C : approx. 100 mm2/s
Tests with mixed friction
Four-ball test/weld force : 3800/4000 N DIN 51 350.4
Friction numbers
- thread : 0.10 DIN 946
- Press-fit test : 0.08 LFW-4 no stick-slip
SRV (cylinder/plate; 450 N, 1.000 μm, 50 Hz, 2h)
- Friction number : 0.10 - 0.13
- depth of wear : 0.3 μm
Corrosion protection tests
Salt-spray test : 500 h DIN 50021

APPLICATION Used for lubricating all types of high-load sliding surfaces. Used especially for low slide speeds and/or oscillating movements and for screw, plug-in and bayonet connectors made from steel and non-ferrous metals.
Separation of components subject to heat stress, such as internal combustion engines, turbines and motor vehicle brake systems.
Corrosion protection of bolts, pins, studs, flanges, spindles and

seatings in refineries, steel and cement works as well as shipping and agricultural engineering