RIVOLTA S.R.K.

High industrial safety – high economic efficiency

RIVOLTA S.R.K. penetrates self-acting and soaks:

-strong deposits of carbon rubbings
-caked dust
-hardened oil and grease layers (oil carbon)
-loose rust and oxide layers etc.

RIVOLTA S.R.K. is used for cleaning of electromotors, diesel motors, heat exchangers, oil coolers of transformers, toothed wheels, chains etc.

RIVOLTA S.R.K. is compatible with metals and materials which are stable in contact with solvents, e.g. paints, plastics and elastomers; rubber may swell, but will not be destroyed

Colour: clear, yellow Odour: faint

Technical data.	Unit of measurement.	Norm.	S.R.K..
Density (20 °C).	g/ml	DIN 51757	0.90
Flashpoint.	°C	DIN EN ISO 2719	-+65°C stable

Material attack: S.R.K. may attack paints and lacquers. Before using it you should test its suitability.

RIVOLTA S.R.K. can be used by spraying, brushing or immersion. Depending on the thickness of the contaminations the product should act for 10 - 30 minutes. If S.R.K. will be absorbed by the contamination layer you should repeat the wetting. When S.R.K. has soaked the contamination you can rinse it with S.L.X.-, M.T.X.-cleaners or with water without any problems.

RIVOLTA S.R.K. PDF Download