RIVOLTA K.S.P.130

Corrosion Inhibiting Oil -fully synthetic,free of silicone-

RIVOLTA K.S.P.130 is a corrosion inhibiting product, based on pure synthetic oils with high efficient corrosion inhibiting additives and solvents. Our product is characterised by a very quick desiccation and the development of a closed extremly thin protection film. Items treated with K.S.P.130 are protected very effectively against corrosion. The product is free of halogenated hydrocarbons, aromatics and carcinogenic chemicals.
Propertye Your useful effect

excellent corrosion protection effect By the selection of high efficient and high-purity ingredients items are protected safely by a closed extremly thin film. K.S.P.130 guarantees a corrosion protecting film on all metallic surfaces.

excellent water separation By the use of special ingredients K.S.P.130 shows a very good separation from carried-in water. So the water, for instance in the immersing bath, can be drained off easily and you can reach a long bath life. Further you will not get any impairment of the quality of the corrosion protection by emulsified water.

high capillary activity high productiveness Because of its high capillary activity K.S.P.130 reaches close tolerances. It creeps in holes gaps and pores. With the thin molecular film K.S.P.130 displaces water and moisture.

excellent material compatibility K.S.P.130 is free of acids and resins. Therefore and because of the pure ingredients K.S.P.130 is neutral against common kinds of paints, plastics and rubber.

high productiveness high economy The thin molecular film causes the high productiveness. A small amount of K.S.P.130 is sufficient for a large surface.

In most cases it is not necessary to remove K.S.P.130 from the surface.

RIVOLTA K.S.P.130 the effective rust and corrosion protector Corrosion Inhibiting Oil

*K.S.P.130 was examined by intensive tests according to DIN EN ISO 6270-2 condensation-water test and DIN EN ISO 9227 salt- fog test. The corrosion preventing time is the result of the laboratory tests and additional field tests.

Applications -to conserve all kinds of machines in case of shipping and transportation

Processing RIVOLTA K.S.P.130 can be applicated by brushing, spray cans or other spraying devices. It is also possible to conserve the items by immersion.

Removal In most cases it is not necessary to remove RIVOLTA

K.S.P.130. If it is necessary, that the protected items have to be cleaned, K.S.P.130 can be removed with waterbased cleaning products (for example B.W.R. 210) or solvent cleaners (M.T.X.-products).